At 05:59 08 September 2009, Greg Arnold wrote:
You can also open the CAI file in SeeYou, save it in Seeyou as an IGC
file, then upload that IGC file to OLC.


That would be assuming you have bought SeeYou. Not too likely with a
borrowed logger! But, yes, that will also work.

Brad, not sure, but I kind of doubt it. You might look at your garmin
file and see if it looks like the same format for the data as a .cai file.
If it does, try saving it with a .cai file extension, and try the program.
You don't have anything to lose but a few minutes of time and a few "k"
of memory on the old machine!

And for what it is worth relative to SeeYou, etc, I am talking to my
loggers with an old TI Extensa running Windows 98, and talking with it
through a REAL serial port. No USB hub there! But to get any further, I
have to save it to a floppy, the use my USB floppy drive on a newer
computer to read the file, convert it, and upload. All my tlaking to the
logger is done with the old Cambridge DOS program, as is initial viewing.
Later viewing is done using the upgraded AeroExplorer II.

Still Old School for sure,

Steve