Thanks for all the info. Can anyone give me some more info on the
"tooling cloth" that is mentioned in Wayne Paul's tail dolly build?

I was just going to use West Systems because I can get it locally, and
have used it in the past. I'll probably take your advice, and go with
another epoxy though.

Pete
On May 13, 5:51*pm, David Walsh wrote:
Pete,

Wayne Paul has a nice page on how to build a tail dolly, *not
specifically what
you are asking about, but you might pick up some general tips.http://www.soaridaho.com/Schreder/Co...lly/index.html

More specifically, check out another of Wayne's pages. On the page,
I think the "carrier links" *are exactly what you are looking for.http://www.soaridaho.com/Schreder/Co...rier/LWT-3.htm

And lastly, Lane Bush has a few photos of a wing cuff for a single man
rigger,
but you should still see the basic strategy. *Check out the Cirrus,
Yahoo
news group, photos, #209 Project photo albums, Wing Rigger Mold.

Hope this gets you going.

Regards,
David Walsh

On May 13, 11:07*am, vontresc wrote:



Anyone got good advice on building a fiberglass wing cuff? I realized
last week that I really need to get rid of the metal wing stands with
sharp corners waiting to punch holes in my Ka-6 wings. So far my plan
was to mold the cuffs on the wing using west systems epoxy. The
question I have is what weight of cloth would you suggest, and how
many layers would be required.

Thanks

Pete