Thread
:
Captured V-1 Pulsjet being Fed
View Single Post
#
5
January 23rd 04, 02:28 AM
B2431
external usenet poster
Posts: n/a
From: Bruce Simpson
ess
On 22 Jan 2004 08:57:57 -0800,
(robert arndt) wrote:
http://www.texasmonthly.com/ranch/sr...1rocket.1.jpeg
A captures pulsejet on a stand. Notice that is operating by being fed
air, fuel, and notice the spark plug lead.
Again, notice how the pulsejet CANNOT operate INDEPENDENTLY without
flying at at least 186 mph.
Rob
Note that, despite what your subject heading might say, this is not a
captured V1 pulsejet being fired. It is actually a replica built by
Survival Research Laboratories. (the page from which the image you
referenced was taken is at :
http://www.texasmonthly.com/ranch/srl/v1.php
and more detail on the
SRL's V1 project can be found at
http://www.srl.org/machines/v1/
Note that SRL have a number of pulsejets in their inventory, and they
all operate without forced air -- a fact that can be testified to by
the thousands of people who have watched their shows.
And don't tell the millions of people who watched me build/drive a
pulsejet powered gokart on Junkyard Wars last year. I wasn't doing
186mph -- but that pulsejet engine was certainly running strong and
loud without a hint of forced air (except briefly just to get it
firing)
And if you check out this page:
http://aardvark.co.nz/pjet/lhkart.shtml
you'll see that I know I was
only going 57mph because I had a GPS system onboard to measure the
speed.
Check the brief video clip at:
http://interestingprojects.com/shcbits01.mpg
You can also see a pulsejet running without forced air on a test stand
in this clip (Real Player required):
http://aardvark.co.nz/pjet/video/pj15srm
So, either I'm achieving the impossible, or I am right when I say that
pulsejets can and do create static thrust and don't need to be moving
through the air at any speed in order to work.
--
you can contact me via
http://aardvark.co.nz/contact/
An impressive site.
Dan, U.S. Air Force, retired
B2431