On Dec 19, 8:53*am, Walter Weir wrote:
The control knob on my Cambridge 302 is slightly bent. It rotates OK
but will not "double click" - it sticks when pushed in and has to be
pulled out. Is it safe to try to bend it straight? Any advice on the
best way to do this?



I don't know about trying to straighten it. However, the control rod
actually goes through the panel. There should be enough wiggle room
in the mounting of the instrument so that if you loosen the 3 screws
that fix the 302 to the panel you can probably move it in a direction
which will not bind the control rod when you click it. The tighten
the 3 screws .

Tom