Is there a conflict between rule 10.9.5.3 and rule 11.2.2.4?

10.9.5.3 says the safety finish is only valid if no more points were
claimed after the finish fix:

"10.9.5.3 When a Safety finish is active, a pilot may (using a Task
Claim form - Rule 10.5.1.3.1) claim a finish by obtaining one fix
within the Safety finish cylinder, provided the slope from the claimed
fix to the Projected Finish Location is not less than 200 feet per
mile and no claimed turnpoint was achieved after the time of the
claimed fix."

But 11.2.2.4 is intended to allow a new task attempt after finishing:
What happens if a pilot make a valid safety finish then waits for the
weather to clear, restarts, and makes a second task attempt that is
abandoned after the first turnpoint? *It appears that the the first
task attempt is invalidated because a claimed turnpoint was achieved
after the safety finish fix.

Does there need to be some language in 10.9.5.3 that allows a second
task attempt?

I think it's pretty clear that "no claimed turnpoint" refers to the
first task attempt. After all, under the old rules you could land,
takeoff again and restart, and we understood the new task was not an
additional turnpoint per safety finish. All we're doing now is
changing things so you don't have to land.

John Cochrane