On Apr 29, 3:27*pm, Rick wrote:
I just tried my new unit today. It seemed to be working fine but when
I uploaded the flight to the SD card it was "busy" for a long time
then shutoff and It won't turn back on. Anybody with any experience on
these new units??

Rick

From the Manual Colibri II

SD card reader
The unit has an integral micro SD card reader positioned on the left
side of the unit.
SD card is used for:
-Uploading TP (CUP format)
-Downloading flights from internal memory (IGC format)
-Uploading of flight declaration in LX format (.HDR )
Note!
Flight data is stored into internal memory, so SD card is not required
to be inserted during flight.


Flight options
Pressing enter on any flight of the logbook will enable Copy to SD and
View
Info function. Copy to SD will copy flight of interest to SD card.
View Info will
show pilot and glider data.

SD Card
SD card is a data transfer medium which makes possible to arrange
input of data (turn points, flight info)
and to export flight data which are stored in flight recorder. The
flights are written to the card in .IGC
format that means immediately ready for flight evaluation.
LOAD TP: Transfers turn point data from SD to device. Pressing enter
button
will show list of all *.cup formatted files in LX/TP directory. Select
file of
interest and start transfer with enter.
LOAD INFO: Transfers header files from uSD to device. Pressing enter
button
will show list of all *.hdr formatted files in LX/FLINFO directory.
Select file from
which you wish to transfer declaration header.
SD INIT: Creates all needed directories on SD card. (LX/TP, LX/FLINFO,
LX/FLIGHTS)
Important!
If TP file has more than 500 points only first 500 will be
transferred, rest will be cut off.

Notice the line that says important!


Richard
www.craggyaero.com