"Andy" wrote in message
...
On May 17, 8:19 am, "Paul Remde" wrote:

Yes the rectangular displays for the PowerFLARM
Brick are also being used at Mifflin. The PowerFLARM Brick is supplied
with
either of the 2 displays shown in the links below - or without any display


Paul and other dealers,

My recollection is that the initial brick offering price included the
standard rectangular display, the Butterfly display was an additional
cost option, and there was no price quoted for the brick with no
display.

If that was true, is there now a new reduced price if no display is
wanted, or has the price with the rectangular display been increased?

I'm also curious to know if the brick being evaluated at Mifflin has
FCC approval. I could not find it listed on the FCC approvals site.

thanks

Andy

_________________________
Hi Andy,

There were 3 options available for the brick when orders were taken in 2010.
- Bare Brick with no display
- Brick with standard rectangular display
- Brick with Display57 which fits into a 57 mm instrument hole.

You can see all 3 options on my web site. The upgrade price to get the
round Display57 is still not firm. It has been estimated at $150, but may
be as little as $75.
http://www.cumulus-soaring.com/flarm.htm

I highly recommend getting a dedicated FLARM display at putting it as high
as possible on the panel - even if you can display FLARM traffic on a PDA or
SN10, etc.

Best Regards,

Paul Remde
Cumulus Soaring, Inc.