View Single Post
  #4  
Old June 5th 12, 03:50 PM posted to rec.aviation.soaring
Steve Leonard[_2_]
external usenet poster
 
Posts: 1,076
Default PowerFLARM updates and installation notes

On Jun 4, 10:42*pm, Frank Whiteley wrote:

I'd recommend 3M Dual-Lock, much stronger than Velcro or other hook and loop fasteners for your delicate electronic gear, especially if movable between your mistresses. *Typically 5X stronger.http://tinyurl.com/7u7t6q5

Frank Whiteley


Just to be contrary, Frank, I do NOT like the Dual-Lock. It takes
considerably more pressure to engage than regualr velcro. And more
pressure over a larger area (the strip they supply with the portable
takes considerable force to engage if you put it on two, flat, firm
surfaces) means you have to push down pretty hard on the top of the
case of that device to get the stuff to engage. More than once, I had
it come loose and slide down the slope of the glareshield of the
Nimbus. Installation for the one flight so far in the BS1 was with
black electrical tape over the top of it. It never even thought of
trying to move. This is not a good, permanent solution for my
portable, but mine won't get held down with Dual-Lock. I am looking
in to brackets and using the small, threaded mounting holes for each
installation.

Steve Leonard