On Saturday, August 11, 2012 5:58:25 PM UTC-7, Andy wrote:
I've been getting familiar with my PowerFLARM brick and Butterfly display before installing it. I created a flarmcfg.txt file and loaded it using a USB stick. The file loads ok as confirmed by the configuration indicating my glider ICAO address. However, after the expected flashing green/red LED sequence, the LED ends up being amber which is supposed to indicate the start-up sequence is still active. The unit operates normally and detects traffic. The LED stays amber whether the stick is removed or not. On the next power up with memory stick removed, the LED ends up being green and the ICAO address is retained. Anyone else see this amber LED after loading? If so, do you have an explanation? thanks, GY

Many things with computer have to be exact. I agree the flarmcfg.txt may work but the manuals have to be read and used exactly. If there are problems then we are all on the same page and on the way to eliminating the issues..


Richard
www.craggyaero.com