I believe the European Flarm is different then the US PowerFlarm. Does this work with US version.


On Friday, June 7, 2013 12:19:51 PM UTC-7, Dan Daly wrote:
On Jun 7, 2:56*pm, Karl Kunz wrote:

Is there a way to declare to a portable PowerFlarm or do you just use written declaration with the IGC file?



Modify your flarmcfg.txt file. Use free flarm config tool software -

http://www.segelflug-software.de/prod_flarmcfgtool.html. Change the

waypoint file using the file of your country (most are in the

software). Select your task waypoints. Push button to make a

flarmcfg.txt file on your microSD card. Insert microSD card into your

portable. Power up.



If your desired waypoints aren't in the country waypoint file, you may

have to edit the waypoint.fln file.



You may be able to declare directly from a PDA. I am able to create

declarations in XC Soar, and send to my PowerFLARM Core/Brick via an

IOIO card and android phone.



Either way gets a valid IGC declaration into my PowerFLARM. Easiest/

cheapest is via microSD or USB flarmcfg.txt file.