PowerFlarm Declaration
On Friday, June 7, 2013 5:22:20 PM UTC-4, Karl Kunz wrote:
Thanks Dan, I'll give it a try.
On Friday, June 7, 2013 12:41:56 PM UTC-7, Dan Daly wrote:
On Jun 7, 3:29*pm, Dan Daly wrote:
On Jun 7, 3:24*pm, Karl Kunz wrote:
I believe the European Flarm is different then the US PowerFlarm. Does this work with US version.
On Friday, June 7, 2013 12:19:51 PM UTC-7, Dan Daly wrote:
On Jun 7, 2:56*pm, Karl Kunz wrote:
Is there a way to declare to a portable PowerFlarm or do you just use written declaration with the IGC file?
Modify your flarmcfg.txt file. *Use free flarm config tool software -
http://www.segelflug-software.de/prod_flarmcfgtool.html. Change the
waypoint file using the file of your country (most are in the
software). Select your task waypoints. Push button to make a
flarmcfg.txt file on your microSD card. Insert microSD card into your
portable. Power up.
If your desired waypoints aren't in the country waypoint file, you may
have to edit the waypoint.fln file.
You may be able to declare directly from a PDA. I am able to create
declarations in XC Soar, and send to my PowerFLARM Core/Brick via an
IOIO card and android phone.
Either way gets a valid IGC declaration into my PowerFLARM. *Easiest/
cheapest is via microSD or USB flarmcfg.txt file.
It does in Canada with a Brick - same as US. *FLARM file is the same
no matter what hardware it is on.
################################################## ######################
# declaration
################################################## ######################
//Task declaration
$PFLAC,S,NEWTASK,12may13
$PFLAC,S,ADDWP,4053033N,07754433W,Ridge So
$PFLAC,S,ADDWP,4102167N,07735883W,Howard D
$PFLAC,S,ADDWP,4039767N,07813100W,Tyrone Gp
$PFLAC,S,ADDWP,4108033N,07721233W,Lock Hav
$PFLAC,S,ADDWP,3941733N,07845850W,Quarry3
$PFLAC,S,ADDWP,4053033N,07754433W,Ridge So
Here's a 500 I declared from Ridge Soaring Gliderport using it from my
flarmconfig.txt file using the software.
Have you had your Flarm calibrated to use is for a badge declaration?
|