Hi Andy,

I don't think your statement below is correct. I think ConnectMe supports
flight log downloads from PowerFLARM, but the PowerFLARM doesn't support it
yet.

Best Regards,

Paul Remde
Cumulus Soaring, Inc.
__________________________________

wrote in message
...

On Tuesday, June 4, 2013 7:50:10 PM UTC-7, Tim Taylor wrote:
Two comments/questions:



1. I had purchased a panel mount extension USB cable to allow me to plug
the USB drive into the panel for upgrades and flight downloads. I didn't
think anything about the cable type but after doing the install I can not
download flights. I started looking at the cable and realized it is USB 3
(labeled SSUSB with Blue tabs). I realized PowerFLARM did not work with
USB 3 drive but never thought about checking the extension cable type as
well.

I installed a USB panel mount extension and downloaded yesterday's flight
just fine. I am unclear what differences in cabling there are between USB 3
and other USB cables since the connectors are identical. Does USB 3 hook up
more of the wires?

2. Will ConnectMe on an Oudie work with a PowerFLARM through a V7? I can
see the serial number but it will not access the flights. Would be nice
if we could use that in the future to download flights.

I'm using and Oudie hooked to a 302 and a PowerFlarm via a K6 MUX - works
great in uploading and downloading to the 302. The ConnectMe software
doesn't yet allow for PowerFlarm up/downloads but I believe they are working
on it.

9B