Hey Jim,

Many years back the wife of my LS-6 partner made us some tie down devices.
She took nylon strap and sewed it into a loop which would slide over the
wing tip. To that, she attached a half loop perpendicular to the original
loop which would ride against the wingtip and keep it from sliding too far
inboard. And, to that, she attached a steel ring to tie a rope.

To use the devices, you'd simply slip them onto the wingtips with the rings
at the bottom and tie the glider down. The stakes should be slightly
inboard to prevent the thingies from slipping off.

She also sewed us some drawstring bags which would hold the stuff and,
should we land out, we could fill the bags with rocks to tie the ship down
while waiting for a retrieve.

I thought the things looked like something you'd find at an adult novelty
shop, but they worked...


"Uncle Fuzzy" wrote in message
...
.... and actually a couple other gliders too. I would like to get the ball
rolling on this, but don't know where to sart. MM or Fidel come do mind.
If needed*, I could provide a 'section' *have otwire, CFPRO, and cnc
template capability) (and ordinate files) , but I'll bet that's stupid
amounts of overkill.
The tie-down sleeve for the LS4 would be the priority, followed by the
Janus, and then a tow-out wing wheel setup for the Speed Astir)
Thanks,
Jim
* Maybe. Last year - easy - now? I'm not sure, though I've cut literally
hundreds of cores.