Did it last winter by myself without much drama. The vise grip trick worked, as did the dish soap. Heating it might be a good idea. the key was getting the channel clean and soaped, and setting up a good system for feeding the plastic into the channel. I let it feed over the back of a folding chair. Good luck. TimOn Thursday, August 29, 2013 5:27:27 PM UTC-6, wrote:
I would like to replace the plastic bumper trim around the sides of my Cobra trailer. I did this to a Cobra a number of years ago and remember it being a nightmare. Has anyone done this and, if so, do you have any tips to make it easier. This is a ASH 25 trailer and is two feet longer than standard so will be quite a length to pull through the channel. Thanks Dale