On Tuesday, February 3, 2015 at 11:20:32 AM UTC-5, Dan Marotta wrote:
I originally used the serial port of my CAI 302 for power but I
think that exceed the output capability of the 302 so I installed a
car 12v adaptor with a USB charger and a toggle switch to control
charging.* I also used a K6BT for the control/data connection to the
302.* The K6BT is wired directly to my DC bus for its power source.*
I have a friend who uses an IOIO and he's happy with that, so it's
really up to you.



Depending on your computer/recorder, your log file can be downloaded
to your streak to carry home.* Note that the proprietary connector
on the side of the Streak is its weak point and will fail with
multiple connect/disconnect cycles.* To get around that, I've
permanently installed the cable in my streak and I download files to
my smart phone (bluetooth).



Now that I've just installed a ClearNav vario, I can simply pull the
USB stick out of the panel and take it home or next door to the FBO
to upload my flight trace.






On 2/3/2015 5:43 AM, HGXC wrote:



On Monday, February 2, 2015 at 6:56:24 PM UTC-5, HGXC wrote:


I have a dell streak and have downloaded the XC soar software. I am having issues having xc soar recognize the data files like maps airspace and waypoints. I can download these data files directly and I had to use file transfer from my pc.

Any ideas on what I am doing wrong.

Dennis


Well we are up and running...thanks all. Now how to connect this to battery for power and my lnav?

Dennis





--

Dan Marotta

So with a ioio board i could plug it into my cam model 20 gps and get connected and power from there? That's what i plug my compaq pda with glide nav today.

Dennis