I seem to have a sticky keyboard...

I've been running my setup at 4800 baud for 3-4 years. Next time I'm at
the airport, I'll give 19,200 a shot.

Dan

On 2/9/2015 7:48 AM, Paul Remde wrote:
Try 19200 baud. The output port is set to 19200 in flight mode.

Best Regards,

Paul Remde
Cumulus Soaring, Inc.

wrote in message
...

These are the settings i used:
Port: K6Bt

Baud: 4800

Bulk Baud: 4800

Driver: Cambridge CAI302

Sync from device: On

Sync to device: On

K6BT: On

Ignore Checksum: On



On Sunday, February 8, 2015 at 3:22:01 PM UTC-5, Dan Marotta wrote:
I use a K6BT previously with a CAI302 now with a ClearNav XC Vario.
I run this on a Dell Streak 5, a Nexus 7, and a Moto X.



All i can suggest is to setup your device in XCSoar as follows:



Port: K6Bt

Baud: 400

Buld Baud: Default

Driver: Cambridge CAI302

Sync from device: On

Sync to device: On

K6BT: On

Ignore Checksum: On



Good luck!




On 2/8/2015 11:55 AM,
wrote:



I'm not able to get data into XCSoar with my intended setup,
nor with other phones I have tried. I bought a Samsung Note 4 because
it has a large bright screen, I have heard others have had good luck
with Note 2 and 3 and I assumed this would be even better. Are other
getting a Note 4 to work?

Intended system: Note 4, Cambridge 302 vario, with a K6 team BT mux,
XCS 6.7.6.

I cannot get the data connection with this setup on any android phone
I tried with XCSoar.
I can get the K6 bluetooth to pair with every phone I have tried it
with. I can only see a valid NMEA stream coming through on the Droid
Ultra phone with the Blue GPS app.

Samsung Note 4 SM N910V Android 4.4.4 internal GPS & Baro
work, K6 BT Mux data does not connect in XCSoar. [I don't know if it
is relevant but there is no phone sim card or microSD data card
installed. XCSoar appears to run fine from internal memory.]

Motorola Droid Ultra XT1080 Android 4.4.4 Blue GPS gets
signal, NMEA stream looks good in Blue GPS. K6 BT Mux data does
not connect in XCSoar.

Motorola Droid Razr Maxx Android 4.1.2, K6 BT Mux data does not
connect in XCSoar.

Are there any specific settings needed for a Samsung Note 4?

What should I try next?
XCSoar 6.8 preview?
is Android 4.4 incompatible?
Would a down revision of Android? If so how what to install?
Should I try something besides K6 BT mux?
Would "blue NMEA" of any use?

could use some help.
Chris





--

Dan Marotta


--
Dan Marotta