View Single Post
  #5  
Old February 7th 16, 03:25 PM posted to rec.aviation.soaring
Don Johnstone[_4_]
external usenet poster
 
Posts: 398
Default Use of drag chutes

At 14:46 07 February 2016, wrote:
I tried to use the tail chute twice in my H-301 Libelle. First time

was
dur=
ing an off field landing, I pulled the chute and stuffed the nose
down.....=
......next thing I knew I was scooting through the weeds doing 80.

The
chute=
hadn't deployed! Next time I gave it a try was a landing at

Winnemucca,
N=
v. I popped the chute on down-wind and soon found I was going

to be way
sho=
rt, so I pulled the jettison handle..............you guessed it, it

didn't
=
jettison! I made the runway, but was a half mile from my desired

stopping
p=
oint. The chute worked fine on the ground, before and after both
incidents.=
My conclusion, unreliable and not necessary in a ship that had

landing
fla=
ps and dive brakes.
FWIW,
JJ


I had a Slingsby Kestrel which had flaps, 2 lots and airbrakes. The
best that could be said about the airbrakes is they made a nice
noise. It also had a tail parachute which was very effective, if it
deployed. The tail parachute was in a shaped box on the bottom of
the rudder. The technique was to select the deployment and then
waggle the rudder from side to side to encourage it to deploy. This
worked most of the time. I used to start an approach where I
intended to use the parachute from 600ft. If it did not deploy I had
enough height to do a 360 deg turn on finals to loose the height.