View Single Post
  #10  
Old February 15th 16, 04:13 PM posted to rec.aviation.soaring
Tango Whisky
external usenet poster
 
Posts: 402
Default Slips in turns and landing with winglets

Le lundi 15 février 2016 16:32:27 UTC+1, Bruce Hoult a écrit*:

I don't agree.

As I've already said once in this thread, you're going to get a certain amount of drag from the fuselage anyway. If the presentation to the airflow for minimum drag generates zero lift then, by the calculus definition of "minimum" of a continuous function, the first little bit of lift will not add any drag. The optimum thing to do is to use it. It might be *very* little, and a very small AoA, but it's nonzero.

If the presentation to the airflow for minimum drag generates non-zero lift ... then of course you'll take it!

Yes, the fuse has a low L/D. But that's better than the 0.0 L/D if you don't take what lift you can from it...


Why do you assume that the fuselage has zero lift in a perfect airflow?
Why do you assume that the increase of drag is zero for small slip angles?

If you slip, you will trade a part of the wing's lift (with a good L/D) for lift from the fuselage (with amn extremely low L/D). Your choice - it wouldn't be mine...