While I can't comment on the lack of .igc files, I have experienced the flaky GPS lock that you mention. One day I'd get gps lock in 1-2 minutes. The next day I'd get zero bars no matter how long I left it on. I thought I had hosed up the GPS antenna so bought a replacement - no joy. I contacted Gary at ClearNav and he advised that this is a common failure scenario for the Garmin GPS module in the 302. Since I had the dreaded "epoc" date problem too, I sent the 302 off for repair. 5 days after I dropped the box off at the post office I had the repaired unit back in my hands. I can report that the new GPS module acquires gps lock in seconds now instead of minutes. And, it will get a lock while inside the gararge where the old one had to be in clear sky - even being under a tree would hose the GPS lock. Clearly, the new GPS module has much better performance.

Robert

On Tuesday, March 29, 2016 at 7:35:45 PM UTC-5, Linwood Stevenson wrote:
Hi All,

Previous flight last week my 302 abruptly quite recording mid flight, a fact I wasn't aware of until after landing and viewing the downloaded .igc file. Was a good 400k+ flight too, but thats beside the point.... Anyway, checked out the log file and it appeared to be full, so I assumed (first mistake) that the memory wrap around feature didn't wrap around. Fix was to clear the log, which I've occasionally done in the past.

So, today when starting the 302 it wasn't locking on satellites after 15 minutes or so. I was in line for a tow, and if I didn't take the tow, would have lost the tow plane for the day. Off we go, no satellites acquired. A few minutes after the release, the satellites finally acquired, and all other 302 features appeared normal. After return home, attempted to download the .igc file once again, only to be greeted with a message to the effect that there were no log files to be downloaded, and none were displayed on the screen...

So, question is, should the 302 start a partial log once the satellites are acquired, or will the log pages stay blank, as they did today. Am I looking at a possible 302 failure, or is this simply operator error on my part?

On top of that, the PowerFlarm portable isn't logging any .igc files either. Might be dead in the water for the Perry contest. Issues always happen before a contest or other event it seems....

Thanks in advance for any suggestions or help!
7B