On Monday, February 13, 2017 at 9:01:30 PM UTC-8, wrote:
On Tuesday, February 14, 2017 at 4:12:08 AM UTC, Frank Whiteley wrote:
On Monday, February 13, 2017 at 7:44:06 PM UTC-7, wrote:
No markings. Were these manufactured with some standard rear axel or a variety of parts? Most look like a GM 48 inches wide, between brake drums.

Plenty of websites. The design engines were 283 and 327 IIRC from plans, so a '60's generation diff would seem to make sense. Several web sites with ID methods.

http://www.roadkillcustoms.com/hot-r...#axzz4Yd41BzKS

http://www.crankshaftcoalition.com/w...identification

http://www.jalopyjournal.com/forum/t...ential.975907/


What model and serial number Gehrlein?

Thank you for the ref pages.

This winch was delivered with a very tired old 327. No winch model markings or serial numbers otherwise. Nothing found on the winch engineering site about stats or others experiences with one or two drum Gerhlein models or didn't look far enough.

Look on "Winch Design" not "Winch Engineering". Not the same group.

Marc