Finished the initial coding for the FLARMCFG.TXT file parsing; output below based on the example file JS provided previously. This is pretty ugly but can be polished up without too much trouble...if anyone is still interested?

Safe soaring!
Brad.

Parameter: NMEAOUT1 Setting: 73 NMEA Ver. 7 - FLARM (inc. PGRMZ) only
Parameter: BAUD1 Setting: 5 57.6 kBaud
Parameter: NMEAOUT2 Setting: 73 NMEA Ver. 7 - FLARM (inc. PGRMZ) only
Parameter: BAUD2 Setting: 5 57.6 kBaud
Parameter: RANGE Setting: 65535 (Unlimited)
Parameter: VRANGE Setting: 2000 m (6562 ft)
Parameter: ADSBRANGE Setting: 6000 m (19685 ft)
Parameter: ADSBVRANGE Setting: 1000 m (3281 ft)
Parameter: PCASRANGE Setting: 3000 m (9843 ft)
Parameter: PCASVRANGE Setting: 800 m (2625 ft)
Parameter: MODEC Setting: 1 (On)
Parameter: OWNMODEC Setting: 0 (Off)
Parameter: PCASCALIBRATION Setting: 30
Parameter: XPDR Setting: 2 (Mode-S)
Parameter: MODESALT Setting: 1 (On)
Parameter: PCASBEEP Setting: 0 (Off)
Parameter: PCASPFLAU1 Setting: 1
Parameter: PCASPFLAU2 Setting: 1
Parameter: AUDIOOUT Setting: 0 (Off)
Parameter: AUDIOVOLUME Setting: 100
Parameter: ID Setting: YOUR 6-DIG
Parameter: ACFT Glider/Motor Glider Setting: 1
Parameter: PILOT Setting: YOUR NAME HERE
Parameter: LOGINT Setting: 4 s
Parameter: GLIDERID Setting: YOUR REGISTRATION
Parameter: GLIDERTYPE Setting: YOUR GLIDER
Parameter: COMPCLASS Setting: YOUR CLASS
Parameter: COMPID Setting: YOUR ID
Parameter: PRIV Setting: 0 (Off)
Parameter: NOTRACK Setting: 0 (Off)