Thread: Exhaust Tape
View Single Post
  #7  
Old July 3rd 03, 03:17 PM
RobertR237
external usenet poster
 
Posts: n/a
Default

In article , Scott writes:


Thanks everybody for the replies. .

It sounds like the wrap does work but would require extra attention for
inspection of cracks. Does it stick to the pipes? Can I remove it
every annual or every other annual to inspect the exhaust pipes?

I have heard about ceramic coating the pipes. Can this be done after
they have been used for a few hundred hours? Also once they are coated,
does the ceramic interfere when repairing them, ie..welding a crack?

thanks,

Scott



I don't know about removal of the wrap but would suspect that it will not go
back on as easily once removed. Just a guess.

My understanding of the ceramic coating is that it can be applied even after
the pipes have been used for a while since the pipes are normally bead blasted
before application to ensure that a good bond is achieved. I would recommend
that it be done before use though. I am not too sure about the repair aspect
but don't believe it would cause any problems.


Bob Reed
www.kisbuild.r-a-reed-assoc.com (KIS Builders Site)
KIS Cruiser in progress...Slow but steady progress....

"Ladies and Gentlemen, take my advice,
pull down your pants and Slide on the Ice!"
(M.A.S.H. Sidney Freedman)