On Saturday, June 22, 2019 at 6:03:17 PM UTC-7, Joel Flamenbaum wrote:
Made my first flight in my very old LS3a - first flight in over 13 years - just like riding a bicycle.

Problem-- cannot connect my new lxnav Nano4 to my Win PC - When I try to download flight the Nano tries to connect to my PC but then my WiFi disconnects cannot seem to load both at same time - so I tried just connecting the Nano and it just spins without connecting.

What am I missing???

Any help appreciated

Joel G5

On the left side of the unit, there is a small hole with a reset button. If you need to reset the unit, use a paper clip to press the reset button. In all normal operations, this button should never be used.

Then make sure the Nano is off.

Connect the NANO4 to a computer using a USB cable. It will automatically power on and go to data transfer mode. If the NANO4 is in data transfer mode, and the USB cable is unplugged, the NANO4 will shut down.

When in data transfer mode, there will be a message on the screen “USB Connected” followed by “USB mounted”. This indicates that NANO4 Flight recorder is in transfer mode. To unmount USB simply press any key on the NANO4 and it will go to normal operation mode.
When in Normal operation mode, the logger is ready for recording flights.
The mode in which the NANO4 is operating can be determined from the main screen, or LEDs when the screen is off.

Richard