"CFII_ASC" wrote:

Typically, to get it to go into the ACTV mode, these things must be
true:
1. In LEG mode (not OBS)
2. In ARM mode (this comes up when you have a valid approach loaded,
and you are within 30nm)

Within 30 nm of what? The IAF? The destination?

3. Valid RAIM now, and predicted at FAF and MAP
4. Outside FAF (110 degree arc each side of FAF)
5. Distance to FAF decreasing
6. Within 2nm of FAF, but not past (inside) FAF
7. NAV/GPS switch must be in the GPS position
8. No localizer frequency may be loaded into NAV 1 (some boxes)

Wow, that last one is pretty strange. I often have an ILS frequency
loaded up, even if I'm not using it. The most frequent use I make of
the NAV part of the GPS/NAV/COM is to fly an ILS, so the last ILS flown
is usually what's left there. What is the logic behind requiring me to
change it to something else?