View Single Post
  #2  
Old June 18th 18, 01:15 AM posted to rec.aviation.soaring
Roy B.
external usenet poster
 
Posts: 304
Default WTB Piper Cub or similar Cockpit Glider Release

On Sunday, June 17, 2018 at 7:18:06 PM UTC-4, wrote:
Looking for Cockpit Glider Release lever mechanism to fit to Piper Cub.
Maybe able to modify cropdusting Dump Lever.


See Below from Aircraft Spruce catalog:
ROY

GLIDER & BANNER TOW RELEASE HANDLE
The release handle is attached to the support bracket in the
cockpit of the airplane. A cable is attached to the handle
and tow hook release. FAA approval can be obtained for
the complete tow hook and release system by following the
guidelines in FAA Advisory Circular 43.13-2B, Chapter 8,
titled, “Glider and Banner Tow-Hitch Installations”. The release
handle is not STC or PMA approved.
PN 13-06283 .....................$179.00
GLIDER & BANNER TOW SUPPORT BRACKET
The support bracket is attached to the floor of the airplane
in the cockpit and is the housing that holds the
release handle. FAA approval can be obtained for the
complete tow hook and release system by following the
guidelines in FAA Advisory Circular 43.13-2B, Chapter 8,
titled, “Glider and Banner Tow-Hitch Installations”. The
support bracket is not STC or PMA approved.
PN 13-06284 .....................$127.00