On Saturday, October 27, 2018 at 4:35:37 PM UTC-7, Richard Pfiffner wrote:
On Friday, October 26, 2018 at 8:36:12 AM UTC-7, Charlie M. (UH & 002 owner/pilot) wrote:
"Bam....be.......".
Yes, I have hit a deer at about 50MPH, amazing the damage that can be done. :-(
Last 2 coats of Vinyl ester primer sand with 180g next. The reason for so many coats of fairing primer and primer is to sand to make sure the surface is flat with no flaws. If you don't do this the finish with not be good and all the defects will show at the finish coat. Next sanding with P180..
http://www.craggyaero.com/ventus.htm
Richard
Richard
www.craggyaero.com
Last coat of JP202 Primer, tomorrow sand with P320, then top coat with JAU Acrylic Urethane.
http://www.craggyaero.com/ventus.htm
Richard
www.craggyaero.com