Thread
:
landing gear cleaning
View Single Post
#
5
July 5th 04, 09:24 PM
Craig
external usenet poster
Posts: n/a
(Bob Miller) wrote in message om...
Powerwash with a good detergent
We tried a friend's power washer last year and were not happy...enough
pressure to clean was enough pressure to remove paint :-(
If you are blowing paint off, then the nozzle angle you were using was
too narrow and the tip was held too close to the gear. I've used a
4500 psi rig on all sorts of stuff and not had that problem when using
the proper nozzle and distances.
Craig C.
Craig