View Single Post
  #2  
Old December 12th 06, 05:52 PM posted to rec.aviation.military.naval
[email protected]
external usenet poster
 
Posts: 55
Default F/A-18D question: loadout for a model project

That's great you care about the weapon configuration details!

Four GBU and four JDAMs is definitely too heavy and draggy load for a
typical flight. The real aircraft with that would lose too much range
and manoeuvrability, and of course use not TER, but VERs. Many
combinations including JDAM, GBU-12/-16, AGM-88 HARM, AGM-65E Maverick
or Zuni launcher (mostly single piece of each type) would look quite
realistic. You can just look for images of F/A-18Ds over the internet,
and you can find some answers.

Another thing, F/A-18C/D Hornet usually tend to carry 2 or 3 fuel tanks
rather than only one. Also, if that is a Marine F/A-18D I would
consider replacing FLIR and laser pods with a LITENING pod on the
centerline, but I do not know if it is included in the model kit, and
if it's suits the era you are referring to (it's quite a new thing on
the real Hornets).

Just a few ideas of mine... Take what you like and leave the rest.

Good luck!
Jacek


On 12 Gru, 07:20, "Matt Wiser" wrote:
I'm just about finished with a 1/72 Hasegawa F/A-18D and have a question loadout. I
want to depict a bird from OIF-1, and have this load in mind; two GBU-12s on TERs each
wing, and two GBU-31 JDAMs each wing, with a centerline bag, FLIR and laser pods, and
two AIM-9Ms on the wingtips. Any help or advice would be appreciated. TIA.

----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==----http://www.newsfeeds.comThe #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----