Grob 103 Twin II Brake Master Cylinder
JJ,
I did purchase a master cylinder from a BMW motorcycle dealer that did fit
in place. Unfortunately it did not function properly. It was properly
bled and all but it did not work. I don't know what to do next. There
must be at least 100 of these gliders in the US that will need a master
cylinder replacement in the future. I don't see how we can junk a $30K
glider for lack of a functioning master cylinder.
Thanks for your comment,
MC
At 13:41 22 October 2008, JJ Sinclair wrote:
If memory serves me, its a motorcycle master cylinder BMW? I believe
they cut it down from the original, good luck getting your inspector
to sign off on installing it!
JJ
Mike McCarron wrote:
My club has a 1983 Grob 103 Twin II that needs a new master cylinder.
Over
the years the Grob factory has made changes to the system without full
documentation and as a result the US distributor can not be sure of
how
I
go about purchasing the proper master cylinder for this glider.
If you or anyone you know has replaced the master cylinder on a
vintage
Grob 103 Twin II recently I would appreciate your input on where I
might
purchase the correct system.
Thank you,
Mike
|