On 09/02/2020 00:00, Paul Remde wrote:
Hi Kevin,

Yes. The Oudie 2 hardware must match the cables used. The mini-USB connector pins changed in the most recent Oudies. If you are using the Oudie power/data cable that was purchased with the Oudie, then you're all set.


Can you provide a bit more info on the change in mini-USB as I thought
this was pretty fixed.

I assume the USB part works just the same so a standard USB cable to a
PC would work with the updater or browsing the Oude as data disk but the
serial port emulation inside the Oudie has changed hence the need for a
new cable to match?

I can see this causing lots of confusion in the future as something
labled as an Oudie power/data cable is no longer just a Oudie power/data
cable


--

Nick Hill