Thread
:
Aircraft Recovery Dolly
View Single Post
#
7
April 28th 09, 12:25 AM posted to rec.aviation.owning
Dan D[_2_]
external usenet poster
Posts: 44
Aircraft Recovery Dolly
These?
http://www.harborfreight.com/cpi/cta...emnumber=93368
"Jay Masino" wrote in message ...
Here's a design that I've been mulling over. Since I don't have the
ability to weld something up, I was considering a double thickness
of 3/4" pressure treated plywood. If you can get a 2' x 4' piece, then
cut it in half and glue/screw the two together to get a 2' x 2' slab of
plywood that's 1 1/2" thick. Then mount 4 of something like these:
http://www.northerntool.com/webapp/w...029422_1029422
using through-bolts, fender washers and locknuts.
You'd get approx 1200' capacity with not too much cost.
--- Jay
--
Jay Masino "Home is where My critters are"
http://www.JayMasino.com
http://www.OceanCityAirport.com
http://www.oc-Adolfos.com
Dan D[_2_]
View Public Profile
View message headers
Find all posts by Dan D[_2_]
Find all threads started by Dan D[_2_]