Where is the aircraft now? If it's anywhere near Ft Worth call Al Heasley,
his cellphone is 817-691-8217, office is 817-490-7855. He's based out of
Northwest Regional (52F) but he travels all over the place and does
_outstanding_ work. I'm sure he can take care of what you need done.
"dave" wrote in message
news:wuElb.1970$Fm2.4519@attbi_s04...
Thanks all,
I ended up ordering them from Wicks.
Now I need to find a place that can swedge them while on the airplane.
There is some room in the wheel wells of the old bonanza.
I can get it done in Ft Worth if I fly the airplane stiff legged there.
It looks like a real pain in the a$$ to pull out the housing and all.
Any suggestions?
Stu Gotts wrote:
I think Dave is close to Addison, so TexAir Addison may have what he
needs if he wants to pay airplane/Jaguar prices. Otherwise, Elliott's
may be the key.
Wed, 22 Oct 2003 04:22:26 GMT, "Juan.Jimenez"
wrote:
Not in Dallas proper, but try Tex-Air Parts in Fort Worth, close to
Meacham
Field, or in Addison, on Ratliff Lane. They usually have these in stock.
www.texair.com.
"dave" wrote in message
newsExkb.827850$uu5.145660@sccrnsc04...
Hi all,
I am looking for a place in dallas to get the following parts
AN667-2 or MS20667-2
and
AN666-2 or MS21259-2
I figured some of you home builders have some good contacts!
Any Ideas?
Thanks
Dave