I was just down there this past weekend working on my IFR ticket. My
instructor told me you basically always end up using the *West* Hampton
altimeter setting and end up using minimums that are 40 feet higher as a
result. I just looked at the plate and it says "Obtain local altimeter
setting on CTAF", which is listed as 122.7 Going strictly by the book, info
received on any other frequency would not be in accordance with the IAP and
therefore not authorized. My guess is he gave you the wrong frequency.

Dave Reinhart


"Peter R." wrote:

Yesterday I flew down to East Hampton (KHTO) airport for the first time.
With approach plates in front of me, I was preparing for my arrival when
NY Approach called to ask if I had the weather at HTO.

Scanning my Jeppesen approach plates a second time, I knew that there
was no AWOS/ASOS (it is an uncontrolled airport) frequency, so what were
they talking about?

I responded with a request for the frequency and was given 122.8 (I
think, please correct me if this wrong), which is different than the
UNICOM freq. So I tuned it expecting to hear an AWOS/ASOS-type
automated recording. Nothing... it was quiet.

So, now what? Do I make a call? If so, who do I call?

Within a minute or so I had what appeared to be my answer. Another
aircraft called "Sound Aircraft, Piper xxx, landing East Hampton,
request current weather and altimeter."

Later I was told that this airport uses a live weather observer during
the day, a rare treat in this new millennium. Unfortunately, I was
unaware of this type of weather retrieval and did not see this
information in the AF/D. Where do I look to find this unique weather
information for other airports that also use a live observer so that in
the future I am better prepared?

--
Peter