Rod ends in single shear
Ed Sullivan wrote:
On Thu, 27 Sep 2007 01:45:50 -0500, cavelamb himself
wrote:
As long as the uiball is tight against the bell crank or horn there
will be no play.
:Ed
True, nut not necessarily the whole story, Ed.
Because there is a small moment due to the off-axis pushrod, the
arm itself could flex.
If the arm is really thin metal (as possible if a sheet steel part
were used) it MIGHT be possible to excite the aileron system -
ie: cause flutter.
Richard
That could be true, however I only attached rod end bearings to 4130
tubing.
Ed
One end, maybe.
But tube arms???
|