DG-300/303 owners...
On Apr 16, 5:09 pm, Steve Davis
wrote:
The wings are reparable so they shouldn't have to
provide free replacements. Since it is a fiberglass
spar cap and the problem seems to be limited to the
wing root it MIGHT be possible to cut a slot into the
rovings and embed some Graphlite carbon fiber rods
into the spar cap. If this is doable the result could
be a far stronger spar than the original design. I
Cutting into a spar there is no good, you only move the problem
further out on the wing where the glue joint is!!
|