wrote in message
...
On Dec 17, 12:46 pm, "Al G" wrote:
"Gig601XLBuilder" wrote in message

...





wrote:
On Dec 17, 10:19 am, "Al G" wrote:
Our City Council recently had some t-hangars built at KRBG. They
were
built on a slope, I think 1.5%. The doors open real easily one way,
and
need
help going the other way. The floors aren't level, the walls aren't
vertical, albeit not by very much.
My question is: Doesn't this cause some structural problems? If
a
snow
load is put on these hangars, doesn't that put a lateral load on the
vertical columns? I don't ever remember a building being built where
the
walls weren't vertical.

Al G

Hard to believe they passed a building inspection, or received a CO.

Ben

It all kind of depends on how they were offset from vertical.

_______
/ \
/ \
/ \

Is going to be stronger than...
_____________
\ /
\ /
\ /

Of course, if you have this...
___________
\ \
\ \
\ \

You're screwed.

Yep, the last one. I've been inside, and saw no special diagonal
bracing. The interior is supported by a large steel "T"'s running
East/West,
with the posts landing in the middle wall. The hangars open East & West,
and
the slope is North/South. It appears that only the hangar skin is
supporting
any load diagonally, and that has the doors cut in it.

In addition, the distance from doors to the middle wall is shorter
than
the distance from the middle wall to the back of the hangar. A Bonanza,
210,
or Warrior all stick out of the door. I guess something like a T-Craft or
Cub would fit.

These are brand new $200/month T-Hangars, fingers are being pointed,
and
the airport manager just quit. I don't know if it matters, but keep in
mind,
this is a city building. They have not needed to comply with the buried
drainage ditches like all the other builders. One of their drainage
gutters
came out 9" above the hangar line it was to protect. An Audit is
underway.

Al G- Hide quoted text -

- Show quoted text -

A Warrior can't fit ???? Geez, That is a BIG screw
up. !!!!!!!!!!!!!!!!!!!!!!!!


Not necessarily. My home field is installing 3 different sizes of T and Box
hangars sized for different types of aircraft. Some are sized for twins up
to MU-2 sized, others are for singles and small twins, and others will fit
smaller aircraft such as AA-1's, RV's, and ultralights.

I'm not saying this is a great solution, but in my airport's situation, it
did result in the best use of the available land.

Ben
www.haaspowerair.com Home of the "beast"
My first 500 hours were in my own Warrior, N4341X.. I loved that
plane.....