Vertical Card Compass Interference?
I'm installing an LXNAV S100 top center in my panel with FLARM, ADS-B and GPS antennas at back/top of instrument shroud. I have a PAI-700 Vertical Card Compass mounted now on top of shroud about 2/3 back from front. As it sits now it would be only ~4" from antennas at rear. If you go by manufacturers' recommendations on anything electrical everything should be at least 3 feet from everything else
.
1 - Does anyone have any empirical evidence of antenna interference specifically from this type of compass?
I could move the compass forward but it gets closer to the S100.
2 - Does anyone have any empirical evidence of Vario/Flight Computer interference from this type of compass?
Note: I am less concerned about the effect on the compass vs the compass effect on the other stuff
Thanks all.
Curt - 95