Thread
:
Winglets for a Nimbus 2
View Single Post
#
3
January 14th 19, 05:44 PM posted to rec.aviation.soaring
[email protected]
external usenet poster
Posts: 26
Winglets for a Nimbus 2
On Tuesday, January 15, 2019 at 4:15:06 AM UTC+13, Bob Holroyd wrote:
At 20:05 12 January 2019,
wrote:
I recently purchased a Nimbus 2 ,before the naysayers get started ,I have
over 1000 hours of which 70 hours in all flying tails, 450 hours on a
kestrel 17 with a drag chute which I used regularly.
The only only issue I have is that I would like the handling to be a bit
more responsive, fitting her with a set of winglets would help.
There is no approved mod from the factory for the installation of
winglets
on a Nimbus2, almost all other models but not the Nimbus2.
Worldwide there are large number of the model flying with winglets.
The CAA here will not approve installation unless they have full
documentation,
My request is that owners with wingleted Nimbus2's have a look at their
approval documents and installation drawings and calculation sheets to
see
where I can get
duplicates of the information, who approved it, to enable a grandfather
process to satisfy the CAA here .
Any help would be appreciated
please email info to gfoneill at xtra dot co dot nz
I had a set fitted to my '2 some 17 years ago.This was pre-EASA and
probably not allowed now in the U.K.
The process involved cutting off the tip and fitting a winglet which
included a new tip.
The winglet was based on that fitted to a Discus A/B and works well.She now
needs less rudder in turns and the glide angle appears slightly better and,
no, I'm not trying to justify fitting them.
Hope this helps, Bob H
Thanks for the reply, I am aware of the better handling and slightly better L/D
the issue is in the paperwork ,CAA wants the docs particularly of the Company or
the Engineer who did the design and calculations certified the structure was able to take all loads and had it approved via their own countries CAA.
From that approval trail it can be forwarded to my CAA, hopefully to be grandfathered into an installation here on my Nimbus 2
Gary
[email protected]
View Public Profile
View message headers
Find all posts by
[email protected]
Find all threads started by
[email protected]