Thank you Paul, I will email them.

Do you know if the LX4000 will send more than just a repeat of the NMEA
received from the GPS? Will it add some "compensated vario"
information that the software on the PDA can use (a little like the
LX1600 and many other varios do)?

Thanks again,

gabriel
p.s. Gilles-Andre, j'ai recu ton email, mais une erreur "unknown user"
me revient lorsque je reply. As-tu un autre email?

Paul Remde wrote:
Hi Gabriel,

I suggest you send an e-mail to . I have received
many wiring diagrams from them upon asking in the past.

If you can't work it out yourself I can create a custom wiring harness for
you.

Good Soaring,

Paul Remde
Cumulus Soaring, Inc.
http://www.cumulus-soaring.com

"Gabriel Duford" wrote in message
ps.com...
Hi!
Is there a way to connect an LX4000 into a PDA?
I am pretty sure there is an output on the LX4000, but there's no info
in my english version of the manual and the only manual available from
LX-Navigation is for v5.3 and is in German and doesn't have wiring
diagrams. I have an electronic German manual for v8.3 (which I have in
my LX4000) but there's no details about the output wiring.

My setup is: LX20 as logger and GPS source for the LX4000.
I'd like to: connect the PDA in the LX4000 to run something like XCSoar
or GPS_LOG.

Thanks,

gabriel