On Jun 17, 12:05*pm, Werner Schmidt wrote:
Hello Martin Gregorie, you wrote at 06.15.2011 14:25





On Tue, 14 Jun 2011 20:46:29 +0200, Werner Schmidt wrote:
Another question: is it possible to set the default starting point for
SIM mode?

Yes, with an entry in the Waypoint details file. This does two things:
- in sim mode it sets the starting point for the program
- it gets added to your target list, so it can be selected easily if
* *you want to abandon the task and go home, even if there is no
* *current task or your home base isn't included in your task.

To use it, you need a defined turnpoint on your home field. Add an entry
for this turnpoint to the 'turnpoint details' file with '=HOME' in the
header for the entry. Here's my minimum home entry:

======================airfields.txt=============== ========
[GRL GrnsdnLd=HOME]
Gransden Lodge

======================airfields.txt=============== ========

I needed some time and some trials to understand that ... finally, I've
got it. I just had to edit my "AirfieldDetails-Germany.txt" file, put
"=HOME" behind the entry of my home airfield and it works.

Again, thank you. Let's see when I'll have the next question ;-)

Regards
* * * * Werner- Hide quoted text -

- Show quoted text -

There is excellent support for XCSoar on thier forum: http://www.xcsoar.org/forum/
.... and http://xcsoar.1045713.n5.nabble.com/
The first one listed is 'new' and I think, preferred by the
developers. The second one probably gets you the widest audience
though....
Both are 'searchable', to see if someone else already had the same, or
similar question.
Cheers,
Jim