On Sun, 30 Oct 2005 02:19:30 GMT, "keepitrunning"
wrote:
"Ron Wanttaja" wrote:
Well...it's not exactly an "either/or" situation. Check out the panel
mounting of an ICOM IC-A5 in my Fly Baby:
http://www.wanttaja.com/hhrad2.JPG
Ron, that is so cool, I want a fun gauge! Any suggestions as to where I
might find one?
Your junk box, if you're lucky. The Fun Meter started out as a small voltmeter
made out of plastic. Once disassembled, the meter face was found to be a small
plastic disk held in place with a couple of tiny screws. I noted the size, drew
up my own meter, printed it on photo paper, and glued it over the old face.
Reassemble the meter, and the rest is history:
http://www.bowersflybaby.com/stories/meter.JPG
Originally, I kept the original needle movement but the needle eventually broke
when I had to take the meter apart to replace the paper face. I now use just a
scrap of white-insulated wire.
I've got a large empty instrument hole where the old radio used to go, and I'm
considering some kind of similar goofy project. Currently, I've just got a Fly
Baby logo in the hole...
http://www.wanttaja.com/hhrad2.JPG (Towards the bottom)
.... but I'd like to put in either a dummy radar or possibly a "weapons status"
display.
Ron Wanttaja