On Tuesday, May 3, 2016 at 8:36:07 AM UTC-7, Karl Kunz wrote:
Thanks Roy I'll give that a try. I had thought of that but given that the rest of the functions worked figured it wasn't the problem.


On Monday, May 2, 2016 at 6:50:46 PM UTC-7, wrote:
On Monday, May 2, 2016 at 11:23:22 AM UTC-4, Karl Kunz wrote:
Just installed a Flarm Core with a Flarmview2 display. Installed the Flarmnet file after running it thru the converter required by LXNav and not getting IDs. My partner also installed the same file on his Flarmview1 with the same result. Is anyone else having this same problem?

Karl:
Play with changes in the baud rate. I had the same problem and finally getting the correct baud rate on flarmview fixed it. Interestingly, after I did the 2015 software update the same problem came back - and it was fixed the same way.
Roy

Karl, I suspected earlier there was an issue but last weekend I saw all the tail numbers. I assume you left the micro SD card in, otherwise this will be the reason as I am pretty sure the micro SD card needs to always be in to retain configuration and flarmnet data.

Ramy