If you want to do it the hard way (like I always like to do!), you can
just cut out a 3-1/8" hole (if it's a 3-18" altimeter) and file the
notch very slowly to fit the adjusting knob...
Scott
Gig 601XL Builder wrote:
Craggy Aero wrote:
I am looking for a drawing for the instrument panel hole for a 3 1/8
altimeter.
Thanks in advance.
Richard
www.craggyaero.com
I'm pretty sure there is one in the ACS catalog and it is available online
in .pdf format.
--
Scott
http://corbenflyer.tripod.com/
Gotta Fly or Gonna Die
Building RV-4 (Super Slow Build Version)