On Sunday, May 30, 2021 at 7:50:42 AM UTC-7, wrote:
On Monday, May 17, 2021 at 11:23:32 AM UTC-5, Ramy wrote:
It was most certainly the aircraft ID.
But now you disabled mode c alerts all together. You may want to turn that back on.

Ramy
I re-enabled mode C yesterday and when flying again got the continuous conflict alerts. In flight I managed to turn the mode C off in the Flarm and the alerts went away. Is there something wrong with my configuration of the FLARM or transponder/ADSB that is causing this? My ADSB set up was just tested and passed, and I just generated a PAPR report for the flight yesterday and it was clean. I updated both my FLARM and Oudie firmware this year, so they should both be up to dare. My FLARM config file is:

################################################## ##################################
# This configuration file must be text only and reside in the top directory of the
# USB stick, SD card or FLARM Tool.
# This configuration file must be named FLARMCFG.TXT
# If you wish to change the settings, you can revisit the online configuration tool
# at any time: https://www.flarm.com
################################################## ##################################
$PFLAC,S,DEF
$PFLAC,S,ID,A4AA4E
$PFLAC,S,ACFT,1
$PFLAC,S,NMEAOUT,71
$PFLAC,S,BAUD,2
$PFLAC,S,RANGE,65535
$PFLAC,S,VRANGE,500
$PFLAC,S,XPDR,2
$PFLAC,S,MODESALT,1
$PFLAC,S,ADSBRANGE,65535
$PFLAC,S,ADSBVRANGE,65535
$PFLAC,S,ADSBWARNINGS,1
$PFLAC,S,PCASRANGE,9260
$PFLAC,S,PCASVRANGE,610
$PFLAC,S,MODEC,1
$PFLAC,S,OWNMODEC,0
$PFLAC,S,PCASCALIBRATION,60
$PFLAC,S,PCASBEEP,1
$PFLAC,S,PCASPFLAU,0
$PFLAC,S,REBROADCASTSERVICES,255
$PFLAC,S,AUDIOOUT,0
$PFLAC,S,AUDIOVOLUME,100
$PFLAC,S,LOGINT,1
$PFLAC,S,PILOT,Livingston/StClair/Bernatz
$PFLAC,S,GLIDERID,N40AF
$PFLAC,S,GLIDERTYPE,LS6a
$PFLAC,S,COMPCLASS,15m
$PFLAC,S,PRIV,0
$PFLAC,S,NOTRACK,0


Rich L.
Try $PFAC,S,MODESALT,0

Richard,