Tom Andersen wrote:

I'm considering buying a completed Glasair 1 FT with an IO360 and FP
prop. I fly a Grumman Cheetah but want a lot more speed and range. I
cannot find any V-speeds on the net for the Glasair 1, only for the
Glasair ll. What kind of TO and LDG distances does it require?

From a G1 brochure - stall w/flaps @ gross weight 62mph, take off roll
gross 700 ft., landing roll gross 530. Best rate 110, Best angle 75,
Maneuvering 145, Never exceed 260. Many G1s have wingtip extensions
which lower the stall speed etc. If yours doesn't have them, then you
could add them. Of course every example is going to be slightly
different. Empty weight on which those specs were probably based is 960
pounds. If the one you're looking at is fatter than that then .....
There are quite a few things you should be looking for in terms of
updates. Best to get with New Glasair for that advice. IIRC, the
archives at http://www.glasair.org/ have some detailed articles about
the progression of Glasair models as well as lots of other stuff that
you'd probably find useful.

Wayne