Larry Dighera wrote:
On Tue, 07 Aug 2007 19:14:59 GMT, wrote in
:

If you go to http://xtronics.com/reference/energy_density.htm you
find the energy densities of a lot of things.


Propane (liquid) 13,900 Wh/kg
Diesel 13,762 Wh/kg
gasoline 12,200 Wh/kg
Ethanol 7,850 Wh/kg
Methanol 6,400 Wh/kg
Secondary Lithium - ion Polymer 130 - 1200 Wh/kg
Primary Zinc-Air 300 Wh/kg
Lead Acid Battery 25 Wh/kg

So batteries have to improve by a factor of 10 to match gasoline.

When you compare the efficiency of internal combustion Otto Cycle
engines (30% - 40%) against electric motors (80% - 95%), it appears
that a factor of five might be a more realistic comparison of their
relative merits. Then there is the issue of power plant weight...

Electric motors don't lose power in thin air either. With regard to
reliability, electric motors have only one moving part compared to
scores of moving parts for IC engines, their failure rate should be
substantially greater than IC engines.

Here is a 100hp electric motor. I don't know if it is typical for an
electric motor but damn the thing weighs over half a ton. I might make the
601XL a little nose heavy. But it's priced right up there with a Lyc of
equal power.

http://www.baldor.com/products/detai...neralPur pose

Catalog Number: D50100P
Description: STOCK MOTOR,368AT,100HP,1750/2000RPM,DPFG
Ship Weight: 1,118 lbs.
List Price: $21,195
Multiplier Symbol: N2