May I recommend that you make sure that you continue to comply with the
1970 Tech Note 278-2 for the Std Cirrus both for the hook and the bearing.
See:
http://www.schempp-hirth.com/index.php?id=30&L=1
The elevator connection for the Std Cirrus is idiosyncratic to rig, not
difficult to mis-connect (in my hands), and requires careful checking
before flight. Not a place for second hand or non-standard parts.
John Galloway
At 14:51 20 September 2008, JJ Sinclair wrote:
I don't see the size spelled out, what I have looks to be about 20mm.
Got to run, Q's will be poppin' today and I'm coming down with an
uncontrollable desire to commit avation!
JJ
Randy wrote:
Good Morning JJ,
I do not know how to post a picture on RAS. That is why I
added it on a mac web page.
I have scanned in a drawing from the Cirrus manual
that show the dimensions.
http://web.me.com/rgteel/Site/Cirrus_C-Hook.html
Or you can send a picture directly to me. My email
in on the webpage.
Randy
You can always compare yours to the one that I have posted
on this page.
On Sep 20, 7:38=EF=BF=BDam, JJ Sinclair wrote:
I have several Cirrus stabs and =EF=BF=BDa fin in the bard, I'll
give
a=
look.
May just give you the part if you'll tell me how to post a picture
on
ras.
JJ