"SimGuy" wrote in message
news
The plate is here-

http://www.airnav.com/depart?http://.../05889VDGC.PDF

While trying to fly the approach in the sim I flew to the MAP with
relative ease but had trouble getting low enough to make the runway
without getting too hot. Looking at the plate it seems a drop of 2380'
must be made between MAFMU and the runway in a lateral distance of
1.4NM, this is a descent angle of 15 degrees!

Could someone please confirm this or help with my interpretation of
the chart. I am a PP beginning instrument training.

TIA

On Sat, 5 Aug 2006 18:09:35 -0700, "Bob Gardner"
wrote:

You get a clue from the fact that there are no straight-in minimums. Then
there is the "C" in the title. When there is no runway number, one of two
things is evident: either the runway is not aligned with the final approach
course (not in this case, of course), or the descent rate does not meet the
400-foot per mile maximum allowable descent rate. You have to circle.

Bob Gardner

(you top-posted so I moved your message)

Thanks, that makes much more sense. But I have a question- the
circling minimum is 10,200', this applies up to the MAP right?
Obviously in circling the runway one would need to get lower.