On Sunday, May 24, 2020 at 10:36:46 AM UTC-4, Dan Daly wrote:
On Sunday, May 24, 2020 at 10:14:26 AM UTC-4, Rob Cluxton wrote:
I’m sure the code/config file matches the Flarm ICAO code. Guess I have to try and find what the FAA has.

It would help if you post your flarmcfg.txt file here.


Here it is:

################################################## ############################
# Cerated by LXNAV PowerFlarmConfig version 1.2.5
#
# This configuration file must be text only and reside in the top directory
# of the USB stick, SD card or FLARM Tool.
# This configuration file must be named FLARMCFG.TXT
# If you wish to change the settings, you can use PowerFlarmTool
# from: https://gliding.lxnav.com/lxdownloads/software/
################################################## ############################

# Basic Settings
$PFLAC,S,ID,AC2D0E
$PFLAC,S,NMEAOUT1,1
$PFLAC,S,NMEAOUT2,1
$PFLAC,S,ACFT,1
$PFLAC,S,CFLAGS,0
$PFLAC,S,PRIV,0
$PFLAC,S,NOTRACK,0
$PFLAC,S,THRE,1

# IGC Settings
$PFLAC,S,LOGINT,4
$PFLAC,S,PILOT,undefined
$PFLAC,S,COPIL,undefined
$PFLAC,S,COMPCLASS,undefined
$PFLAC,S,COMPID,undefined
$PFLAC,S,GLIDERID,undefined
$PFLAC,S,GLIDERTYPE,undefined

# Baud rate
$PFLAC,S,BAUD1,2
$PFLAC,S,BAUD2,2

# Range
$PFLAC,S,MODEC,1
$PFLAC,S,OWNMODEC,0
$PFLAC,S,XPDR,2
$PFLAC,S,MODESALT,0
$PFLAC,S,PCASRANGE,7408
$PFLAC,S,PCASVRANGE,610
$PFLAC,S,PCASPFLAU1,0
$PFLAC,S,PCASPFLAU2,0
$PFLAC,S,PCASBEEP,1
$PFLAC,S,PCASCALIBRATION,30
$PFLAC,S,ADSBRANGE,65535
$PFLAC,S,ADSBVRANGE,65535
$PFLAC,S,RANGE,2000
$PFLAC,S,VRANGE,500

# Device Settings
$PFLAC,S,AUDIOOUT,0
$PFLAC,S,AUDIOVOLUME,100
$PFLAC,S,BATTERYTYPE,0
$PFLAC,S,BRIGHTNESS,100
$PFLAC,S,VOL,3