On Sunday, May 31, 2020 at 7:06:57 AM UTC-7, Rob Cluxton wrote:
On Sunday, May 24, 2020 at 10:36:46 AM UTC-4, Dan Daly wrote:
On Sunday, May 24, 2020 at 10:14:26 AM UTC-4, Rob Cluxton wrote:
I’m sure the code/config file matches the Flarm ICAO code. Guess I have to try and find what the FAA has.

It would help if you post your flarmcfg.txt file here.


Here it is:

################################################## ############################
# Cerated by LXNAV PowerFlarmConfig version 1.2.5
#
# This configuration file must be text only and reside in the top directory
# of the USB stick, SD card or FLARM Tool.
# This configuration file must be named FLARMCFG.TXT
# If you wish to change the settings, you can use PowerFlarmTool
# from: https://gliding.lxnav.com/lxdownloads/software/
################################################## ############################

# Basic Settings
$PFLAC,S,ID,AC2D0E
$PFLAC,S,NMEAOUT1,1
$PFLAC,S,NMEAOUT2,1
$PFLAC,S,ACFT,1
$PFLAC,S,CFLAGS,0
$PFLAC,S,PRIV,0
$PFLAC,S,NOTRACK,0
$PFLAC,S,THRE,1

# IGC Settings
$PFLAC,S,LOGINT,4
$PFLAC,S,PILOT,undefined
$PFLAC,S,COPIL,undefined
$PFLAC,S,COMPCLASS,undefined
$PFLAC,S,COMPID,undefined
$PFLAC,S,GLIDERID,undefined
$PFLAC,S,GLIDERTYPE,undefined

# Baud rate
$PFLAC,S,BAUD1,2
$PFLAC,S,BAUD2,2

# Range
$PFLAC,S,MODEC,1
$PFLAC,S,OWNMODEC,0
$PFLAC,S,XPDR,2
$PFLAC,S,MODESALT,0
$PFLAC,S,PCASRANGE,7408
$PFLAC,S,PCASVRANGE,610
$PFLAC,S,PCASPFLAU1,0
$PFLAC,S,PCASPFLAU2,0
$PFLAC,S,PCASBEEP,1
$PFLAC,S,PCASCALIBRATION,30
$PFLAC,S,ADSBRANGE,65535
$PFLAC,S,ADSBVRANGE,65535
$PFLAC,S,RANGE,2000
$PFLAC,S,VRANGE,500

# Device Settings
$PFLAC,S,AUDIOOUT,0
$PFLAC,S,AUDIOVOLUME,100
$PFLAC,S,BATTERYTYPE,0
$PFLAC,S,BRIGHTNESS,100
$PFLAC,S,VOL,3

Why are you using a LXNAV config file instead of a Powerflarm cfg tool.. They are not the same device, similar but not the same. the LXNAV is for config your PowerMouse, FlarmBat, FlarmMouse. It appears you are missing many config items. Let us start with a very important setting.

#PFLAC,S,DEF Sets Default
$PFLAC,S,DEF

Try turning off the PCAS $PFLAC,S,PCASRANGE,0 and see what happens.

Richard,